Mastercam 2018 lathe stock setup free.CNC Lathe Solutions

Looking for:

CNC Lathe Programming Software Solutions | Mastercam Products.Free CAD/CAM Software Download | Mastercam

Click here to Download


Our lathe cam programming software gives you a set of tools to turn your parts exactly as you need them. Mastercam Lathe provides easy roughing, grooving, threading, parting, boring, drilling, and finishing routines for increased productivity.

Mastercam Lathe also delivers a set of C-axis programming tools, with greatly expanded options when combined with Mastercam Mill , such as face contour and drilling and cross contour and drilling. More people use Mastercam than any other CAM software. From CAD inception to the creation of a final machined part, Mastercam is designed as a comprehensive solution for manufacturing efficiency.

Automatically stop machining to check the insert during your roughing, finishing, and grooving operations.

Open virtually any CAD file in Mastercam to access modeling and prep tools for CAM programmers to get parts on and off machines quickly. Take advantage of innovative profile tools and processes aimed at greater efficiency and higher machining productivity. Get the confidence to run the most complex toolpaths on your machine and ensure your parts are done right the first time.

Extend tool life with proprietary toolpath strategies that maximize material removal rate and reduce cycle times. See the table below for minimum and recommended system configurations for Mastercam. These recommendations are based on systems we have in use at CNC Software for testing and evaluation purposes.

Our recommendation is to get as much power processor, video card, and memory for your systems as you can afford. CNC Software, Inc. We recommend using Windows 10 bit Professional editions. While Mastercam may run on other Windows editions such as Home Edition or virtual environments such as Parallels for Mac , it has not been tested on these configurations and is therefore not supported.

The processor speed will impact how fast the software will calculate and complete tasks. With each release, more and more aspects of Mastercam are becoming multi-core processor aware. Toolpath calculation and Simulation will generally run faster with a multi-core processor. When Mastercam uses all available RAM, it switches to using virtual memory space, which is stored on the hard drive, and will dramatically slow the system down. We recommend a minimum of 8GB memory.

When purchasing a new computer for Mastercam, one of the most important component is the video card. Other graphics cards can be used, but they must offer full OpenGL 3. OpenCL is required for Mastercam to be able to hand off certain computation tasks to the graphics card to increase system performance. We do not recommend or support the use of onboard graphics found with some PC configurations. These do not generally have the capability to drive graphics intensive applications such as Mastercam.

Make sure you are using up-to-date drivers from your card manufacturer. We often see issues that are resolved with updated video drivers. The driver version can have a great impact on how the card performs. We recommend using the automatic detect feature to detect which video card is installed. More information on configuring the graphics card can be found at this Mastercam knowledge base article.

The majority of our internal systems utilize dual monitors and we find this to be more productive. A second monitor allows applications such as Mastercam Simulator, Code Expert, Tool Manager and other applications to run on the secondary monitor while Mastercam utilizes the primary monitor. Mastercam will run on lower resolution screens but beware of potential sizing issues with larger dialog boxes and panels which may be awkward to work with.

Lower resolution monitors may work fine as a second monitor in a dual screen setup. Mastercam will run on large format displays, including 4K monitors and high-DPI devices however, we do some display issues with these configurations. These drives are now priced at a point which makes them a good investment. Many of our test systems employ a smaller primary SSD for the OS and installed applications with a second large capacity conventional drive for data.

A 3D mouse improves the way you interact with your 3D application. It is designed to be used by your non-dominant hand in tandem with a standard mouse for a balanced and cooperative work style. Additional technical and purchase information can be found on the 3Dconnexion website. Most computers today have some kind of anti-virus software to protect from unwanted malware.

In some cases, these have been found to interfere with applications such as Mastercam which are running on the computer. CNC Software does not recommend specific anti-virus products, but if you see unexpected issues, it may be a conflict with anti-virus software.

Try temporarily disabling the anti-virus software or setting an exception for Mastercam. Our global community of Mastercam users, experts, educators, and enthusiasts helps you get the most from your investment. CNC lathe programming software is used to create toolpaths through G-code to operate computer numerical control CNC lathe machines. This allows for machine automation, where the machine cuts a part to the specifications of the input code.

Some lathes are equipped with the ability to do limited milling, and some shops modify their lathes to do light milling. In general, parts that combine both techniques are better suited for separate action on dedicated lathes and mills, or in one setup on a mill-turn machine.

A CNC lathe is generally used to cut roughly cylindrical parts where the outline of the shape is symmetrical when rotated degrees around a central axis. Some lathes allow additional non-symmetrical cutting with drills, endmills, and other milling tools. The way to get this software is through your local Mastercam Reseller.

In addition, they will provide ongoing sales, service, and technical support to help you optimize the productivity of both your CNC lathes and shop at large. CNC lathe programming software eliminates manual errors that can occur when a part is programmed by hand. It eliminates the need to perform complex mathematical equations for cutter control and allows quick adaptation to new parts.

Skip to content. Full 3D CAD modeling. Context-sensitive help available from all dialog boxes. Powerful Multiaxis tool motion. Mill-Turn for Lathe. Quick toolpath functions let you program basic parts with just a few clicks.

Easy roughing, finishing, threading, grooving, boring, drilling, and cut off. Intelligent, stock-aware toolpaths. Robust 3D solids and surface machining. Complete tool library and custom tool support. Learn how our turning solutions can help solve your manufacturing challenges. Live Tooling Machine any job with the combined power of C- and Y-axis machining. Tool Inspection Automatically stop machining to check the insert during your roughing, finishing, and grooving operations.

Toolpath Verification Get the confidence to run the most complex toolpaths on your machine and ensure your parts are done right the first time. Learn More. Achates Power Learn More. Asnuntuck Community College Learn More. Butler Tech Learn More.

Carolina Precision Components, Inc. Cornfield Crappie Gear Learn More. Don Schumacher Racing Learn More. Kormachine Learn More. Machining Learn More. Magnuson Products Learn More. Monsees Group Learn More. Moto Engineering and Prototype Learn More. Northwood Industries Learn More. Progressive Tool and Manufacturing, Inc. Royell Manufacturing, Inc. Spartanburg Community College Learn More. Specialized Bicycle Components Learn More. Stark State College Learn More.

Triple C Machine Learn More. What is CNC lathe programming software? Can I do milling on a lathe? What is CNC lathe machine used for? Why is CNC lathe programming software helpful? Please contact a local Mastercam Reseller for additional information and expert advice about products and services to meet your exact needs. Find My Reseller.



Mastercam 2018 lathe stock setup free.Mastercam 2018 download free lathe tutorial pdf


This video shows the use of Stock Recognition in the Lathe environment for Mastercam. The use of Stock Recognition in Mastercam can be extremely valuable in the lathe environment.

Stock Recognition can be used to ensure all roughing passes are the same depth and also automatically update toolpaths if the stock sized is changed. Often overlooked, Stock Recognition is one of the most powerful features in the Lathe environment in Mastercam.

A common issue, when the piece of material you are going to cut is larger in diameter than your chained geometry. If you do not enable Stock Recognition on that roughing operation, the toolpath does not know where to start the toolpath from in regards to the diameter.

Mastercam will start its roughing for that toolpath from the highest point in X of the chained geometry. So, lets say you have a 2″ diameter bar. The chained geometry has a highest point on it’s largest diameter, which is 1. The first cut that would happen would occur below the chained geometry by the cut amount of the operation. Needless to say, no matter what that depth cut is set at, you will be cutting more than 0.

It’s not Mastercam fault though, it’s just working with the info you’re giving it. If you enable Stock Recognition, and have defined the Stock correctly in the machine setup, Mastercam can automatically start roughing from the current state of the stock.

This will save you from accidentally cutting too much material on that first roughing pass. You also have the option to Adjust Stock. The Adjust Stock dialog box lets you adjust the area of the stock to be removed by the roughing operation.

This option is available only if:. Topics: Mastercam , Mastercam , Lathe. Stock Recognition can be used in several different ways Remaining stock : uses only stock remaining from previous operations. Use stock for outer boundary : uses a section of the stock boundary as the outer boundary. Extend contour to stock only : linearly extends the ends of the chained contour to the stock. Disable stock recognition : provides no stock recognition.

This option is available only if: You define stock boundaries in the machine group properties. The chained contour lies entirely within the stock boundary. Written by camInstructor Mike camInstructor Mike is Mike Wearne, an avid machinist, cnc programmer and overall connoisseur of all things machining.

Subscribe to Email Updates. Recent Popular Categories. Search Blog. Recent Posts. CamInstructor Inc.


Leave a Comment

Your email address will not be published. Required fields are marked *